IDPD
- Updated2025-04-08
- 1 minute(s) read
Groups
Group members
| Name | Description |
|---|---|
| RFMXSPECAN_ATTR_IDPD_ALL_TRACES_ENABLED | Specifies whether to enable the traces to be stored and retrieved after performing the IDPD measurement. |
| RFMXSPECAN_ATTR_IDPD_DUT_AVERAGE_INPUT_POWER | Specifies the initial (first itertion) average power of the signal at the input port of the device under test. |
| RFMXSPECAN_ATTR_IDPD_EVM_ENABLED | Specifies whether to enable EVM computation. |
| RFMXSPECAN_ATTR_IDPD_EVM_UNIT | Specifies the units of the EVM results. |
| RFMXSPECAN_ATTR_IDPD_GAIN_EXPANSION | Specifies the increase of input power relative to the peak power value of the reference signal. This value is expressed in dB. |
| RFMXSPECAN_ATTR_IDPD_IMPAIRMENT_ESTIMATION_START | Specifies the start time of the impairment estimation interval relative to the start of the reference waveform. This value is expressed in seconds. |
| RFMXSPECAN_ATTR_IDPD_IMPAIRMENT_ESTIMATION_STOP | Specifies the stop time of the impairment estimation interval relative to the start of the reference waveform. This value is expressed in seconds. |
| RFMXSPECAN_ATTR_IDPD_MEASUREMENT_ENABLED | Specifies whether to enable IDPD measurement. |
| RFMXSPECAN_ATTR_IDPD_NUMBER_OF_ANALYSIS_THREADS | Specifies the maximum number of threads used for parallelism for the IDPD measurement. |
| RFMXSPECAN_ATTR_IDPD_POWER_LINEARITY_TRADEOFF | Specifies the gain tradeoff factor that sets the gain expected from the DUT after applying IDPD on the input waveform. This value is expressed as a percentage. |
| RFMXSPECAN_ATTR_IDPD_REFERENCE_WAVEFORM_IDLE_DURATION_PRESENT | Specifies whether the reference waveform contains idle duration or dead time. |
| RFMXSPECAN_ATTR_IDPD_SIGNAL_TYPE | Specifies the type of reference waveform. |
| RFMXSPECAN_ATTR_IDPD_SYNCHRONIZATION_ESTIMATION_START | Specifies the start time of the synchronization estimation interval relative to the start of the reference waveform. This value is expressed in seconds. |
| RFMXSPECAN_ATTR_IDPD_SYNCHRONIZATION_ESTIMATION_STOP | Specifies the stop time of the synchronization estimation interval relative to the start of the reference waveform. This value is expressed in seconds. |
| RFMXSPECAN_ATTR_IDPD_TARGET_GAIN | Specifies the Target gain when the configured pre-distorted waveform is non-empty. |
Attachments
None