CHP
- Updated2025-10-13
- 1 minute(s) read
Groups
Group members
| Name | Description |
|---|---|
| RFMXSPECAN_ATTR_CHP_ALL_TRACES_ENABLED | Specifies whether to enable the traces to be stored and retrieved after performing the CHP measurement. |
| RFMXSPECAN_ATTR_CHP_AMPLITUDE_CORRECTION_TYPE | Specifies whether the amplitude of the frequency bins, used in the measurement, is corrected for external attenuation at the RF center frequency, or at the individual frequency bins. Use the RFmxInstr Configure External Attenuation Table function to configure the external attenuation table. |
| RFMXSPECAN_ATTR_CHP_MEASUREMENT_ENABLED | Specifies whether to enable the CHP measurement. |
| RFMXSPECAN_ATTR_CHP_MEASUREMENT_MODE | Specifies whether the measurement calibrates the noise floor of analyzer or performs the CHP measurement. Refer to the measurement guidelines section in the Noise Compensation Algorithm topic for more information. |
| RFMXSPECAN_ATTR_CHP_NUMBER_OF_ANALYSIS_THREADS | Specifies the maximum number of threads used for parallelism for CHP measurement. |
| RFMXSPECAN_ATTR_CHP_SPAN | Specifies the frequency range around the center frequency, to acquire for the measurement. This value is expressed in Hz. |
Attachments
None