AMPM

Specifies whether to enable the traces to be stored and retrieved after performing the AMPM measurement.

Specifies whether to enable the results that rely on the AM to AM characteristics.

Specifies whether to enable the results that rely on AM to PM characteristics.

Specifies the average power of the signal at the input port of the device under test. This value is expressed in dBm.

Specifies whether to enable the RFMXSPECAN_ATTR_AMPM_RESULTS_MEAN_RMS_EVM attribute.

Enables frequency offset correction for the measurement.

Enables IQ origin offset correction for the measurement.

Specifies the maximum time alignment error expected between the acquired and the reference waveforms. This value is expressed in seconds.

Specifies whether to enable the AMPM measurement.

Specifies the duration of the reference waveform considered for the AMPM measurement. When the reference waveform contains an idle duration, the AMPM measurement neglects the idle samples in the reference waveform leading up to the start of the first active portion of the reference waveform. This value is expressed in seconds.

Specifies the maximum number of threads used for parallelism for the AMPM measurement.

Specifies the reference power used for AM to AM and AM to PM traces.

Specifies whether the reference waveform is a modulated signal or a combination of one or more sinusoidal signals. To time-align the sinusoidal reference waveform to the acquired signal, set the AMPM Signal Type attribute to Tones, which switches the AMPM measurement alignment algorithm.

Specifies the method used for synchronization of acquired waveform with reference waveform.