Specifies the attenuation of a switch (or cable) connected to the RF IN connector of the signal analyzer. This value is expressed in dB. For more information about attenuation, refer to the Attenuation and Signal Levels topic for your device in the NI RF Vector Signal Analyzers Help.

Syntax

RFMXSPECAN_ATTR_EXTERNAL_ATTENUATION

Numeric Value

Data Type

Access

Applies To

1048579

float64

Read/Write

N/A

Remarks


You do not need to use a selector string to configure or read this attribute for the default signal instance. Refer to the Selector String topic for information about the string syntax for named signals.

The default value is 0.