FetchIntrapulseStabilityTrace(string, double, ref AnalogWaveform< float >, ref AnalogWaveform< float >, ref AnalogWaveform< float >)
- Updated2025-10-13
- 1 minute(s) read
Fetches the intrapulse stability trace over multiple measurement points, for the selected pulse or position.(br/)
Syntax
Namespace: NationalInstruments.RFmx.PulseMX
public int FetchIntrapulseStabilityTrace(string selectorString, double timeout, ref AnalogWaveform< float > intrapulseAmplitudeStability, ref AnalogWaveform< float > intrapulsePhaseStability, ref AnalogWaveform< float > intrapulseTotalStability)
Parameters
| Name | Type | Description |
|---|---|---|
| selectorString | string | Specifies a selector string comprising of the result name. If you do not specify the result name, the default result instance is used. Example: |
| timeout | double | Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the method waits until the measurement is complete. |
| intrapulseAmplitudeStability | ref AnalogWaveform< float > | Upon return, contains the intrapulse amplitude stability trace at multiple measurement points. This value is expressed in dB. |
| intrapulsePhaseStability | ref AnalogWaveform< float > | Upon return, contains the intrapulse phase stability trace at multiple measurement points. This value is expressed in dB. |
| intrapulseTotalStability | ref AnalogWaveform< float > | Upon return, contains the intrapulse total stability trace at multiple measurement points. This value is expressed in dB. |
Returns
Returns the status code of this method. The status code either indicates success or describes a warning condition.