Configuration
- Updated2025-10-13
- 1 minute(s) read
Groups
Group members
| Name | Description |
|---|---|
| RFmxPulse_AutoLevel | Examines the input signal to calculate the peak power level and sets it as the value of the RFMXPULSE_ATTR_REFERENCE_LEVEL attribute. Use this function to help calculate an approximate setting for the reference level. |
| RFmxPulse_Cfg1ReferenceWaveform | Configures the reference pulse waveform used for time sidelobe measurements. |
| RFmxPulse_Cfg1ReferenceWaveformSplit | Configures the reference pulse waveform used for time sidelobe measurements. |
| RFmxPulse_CfgExternalAttenuation | Specifies the attenuation of a switch (or cable) connected to the RF IN connector of the signal analyzer. |
| RFmxPulse_CfgFrequency | Configures the expected carrier frequency of the RF signal to acquire. The signal analyzer tunes to this frequency. |
| RFmxPulse_CfgFrequencyReference | Configures the Reference Clock and the frequency reference source. |
| RFmxPulse_CfgMechanicalAttenuation | Configures the mechanical attenuation and the RFmx driver attenuation hardware settings. |
| RFmxPulse_CfgRF | Configures the RF attributes of the signal specified by the selector string. |
| RFmxPulse_CfgRFAttenuation | Configures the nominal attenuation and the RFmx driver setting. |
| RFmxPulse_CfgReferenceLevel | Configures the reference level, which represents the maximum expected power of an RF input signal. |
| RFmxPulse_SendSoftwareEdgeTrigger | Sends a trigger to the device when you use the RFmxPulse Configure Trigger function to choose a software version of a trigger and the device is waiting for the trigger to be sent. You can also use this function to override a hardware trigger. |
Attachments
None