Attributes

Specifies the acquisition length for the pulse measurement. This value is expressed in seconds.

Specifies the expected carrier frequency of the acquired RF signal. This value is expressed in Hz. The signal analyzer tunes to this frequency.

Specifies the attenuation of a switch or cable connected to the RF IN connector of the signal analyzer. This value is expressed in dB. For more information about attenuation, refer to the RF Attenuation and Signal Levels topic for your device in the NI RF Vector Signal Analyzers Help.

Specifies the bandwidth of the filter used for the required sample rate. This value is expressed in Hz.

Specifies the demodulation filter type to be used in the measurements.

Specifies the reference level that represents the maximum expected power of the RF input signal. This value is expressed in dBm for RF devices and V_pk-pk for baseband devices.

Specifies the margin RFmx adds to the RFMXPULSE_ATTR_REFERENCE_LEVEL attribute. The margin avoids clipping and overflow warnings if the input signal exceeds the configured reference level.

Specifies the wait time before results are available in the RFmxPulse Attribute. This value is expressed in seconds.

Specifies the instrument port to be configured to acquire a signal. Use RFmxInstr_GetAvailablePorts function to get the valid port names.