Groups

Group members

NameDescription
RFmxNR_AutoLevel

Examines the input signal to calculate the peak power level and sets it as the value of the RFMXNR_ATTR_REFERENCE_LEVEL attribute. Use this function to calculate an approximate setting for the reference level. The RFmxNR Auto Level function completes the following tasks:

RFmxNR_CfgExternalAttenuation

Specifies the attenuation of a switch or cable connected to the RF IN connector of the signal analyzer.

RFmxNR_CfgFrequency

Configures the expected carrier frequency of the RF signal to acquire. The signal analyzer tunes to this frequency.

RFmxNR_CfgFrequencyReference

Configures the Reference Clock and the frequency reference source.

RFmxNR_CfgMechanicalAttenuation

Configures the mechanical attenuation and the RFmx driver attenuation hardware settings.

RFmxNR_CfgReferenceLevel

Configures the reference level which represents the maximum expected power of an RF input signal.

RFmxNR_CfgRf

Configures the RF attributes of the signal specified by the selector string.

RFmxNR_CfgRfAttenuation

Configures the nominal attenuation and the RFmx driver setting.

RFmxNR_CfggNodeBCategory

Configures the gNodeB Category of the signal being measured.

RFmxNR_SendSoftwareEdgeTrigger

Sends a trigger to the device when you use the RFmxNR Configure Trigger function to choose a software version of a trigger and the device is waiting for the trigger to be sent. You can also use this function to override a hardware trigger. This function returns an error in the following situations:

Attachments

None