CHP

Download PDF

Groups


Name	Description
RFMXNR_ATTR_CHP_ALL_TRACES_ENABLED	Specifies whether to enable the traces to be stored and retrieved after performing the CHP measurement.
RFMXNR_ATTR_CHP_AMPLITUDE_CORRECTION_TYPE	Specifies whether the amplitude of frequency bins in the spectrum used by the measurement is corrected for external attenuation at RF center frequency or corrected for external attenuation at individual frequency bins Use the RFmxInstr Configure External Attenuation Table function to configure the external attenuation table.
RFMXNR_ATTR_CHP_INTEGRATION_BANDWIDTH_TYPE	Specifies the integration bandwidth (IBW) type used to measure the power of the acquired signal. Integration bandwidth is the frequency interval over which the power in each frequency bin is added to measure the total power in that interval.
RFMXNR_ATTR_CHP_MEASUREMENT_ENABLED	Specifies whether to enable the channel power measurement.
RFMXNR_ATTR_CHP_MEASUREMENT_MODE	Specifies whether the measurement calibrates the noise floor of analyzer or performs the CHP measurement.
RFMXNR_ATTR_CHP_NUMBER_OF_ANALYSIS_THREADS	Specifies the maximum number of threads used for parallelism for the CHP measurement.
RFMXNR_ATTR_CHP_SUBBLOCK_INTEGRATION_BANDWIDTH	Specifies the integration bandwidth of the subblock. This value is expressed in Hz. It is the span from left edge of the integration bandwidth of the leftmost carrier to the right edge of the integration bandwidth of the rightmost carrier within a subblock.

None