ACP

Download PDF

Groups


Name	Description
RFMXNR_ATTR_ACP_ALL_TRACES_ENABLED	Specifies whether to enable the traces to be stored and retrieved after performing the ACP measurement.
RFMXNR_ATTR_ACP_AMPLITUDE_CORRECTION_TYPE	Specifies whether the amplitude of the frequency bins, used in measurements, is corrected for external attenuation at the RF center frequency, or at the individual frequency bins. Use the RFmxInstr Configure External Attenuation Table function to configure the external attenuation table.
RFMXNR_ATTR_ACP_CHANNEL_CONFIGURATION_TYPE	Specifies the method to configure the carrier and the offset channel settings.
RFMXNR_ATTR_ACP_MEASUREMENT_ENABLED	Specifies whether to enable the ACP measurement.
RFMXNR_ATTR_ACP_MEASUREMENT_METHOD	Specifies the method for performing the ACP measurement.
RFMXNR_ATTR_ACP_MEASUREMENT_MODE	Specifies whether the measurement calibrates the noise floor of analyzer or performs the ACP measurement.
RFMXNR_ATTR_ACP_NUMBER_OF_ANALYSIS_THREADS	Specifies the maximum number of threads used for parallelism for the ACP measurement.
RFMXNR_ATTR_ACP_POWER_UNITS	Specifies the unit for absolute power.
RFMXNR_ATTR_ACP_SUBBLOCK_INTEGRATION_BANDWIDTH	Specifies the integration bandwidth of a subblock. This value is expressed in Hz.
RFMXNR_ATTR_ACP_SUBBLOCK_OFFSET	Specifies the offset of the subblock measurement relative to the subblock center. This value is expressed in Hz.

None