Routes signals (triggers, clocks, and events) to the specified output terminal.

Note This VI is not supported on a MIMO session.


icon

Inputs/Outputs

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In identifies the instrument session. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI or the RFmxInstr Initialize NIRFSA (Array) VI.

  • ci32.png Export Signal Source —

    Export Signal Source controls the source to export signals.

    Start Trigger (0)

    Start trigger is sourced.
    Ref Trigger (1)

    Reference trigger is sourced.
    Advance Trigger (2)

    Advance trigger is sourced.
    Ready for Start Event (3)

    Ready for Start event is sourced.
    Ready for Advance Event (4)

    Ready for Advance event is sourced.
    Ready for Ref Event (5)

    Ready for Reference event is sourced.
    End of Record Event (6)

    End of Record event is sourced.
    Done Event (7)

    Done event is sourced.
    Reference Clock (8)

    Reference clock is sourced.
  • cstr.png Export Signal Output Terminal —

    Export Signal Output Terminal specifies the terminal where the signal is exported. You can also choose not to export any signal.

    The default value is "" (empty string).

    Do not export signal (())

    The signal is not exported.
    ClkOut (ClkOut)

    Export the Reference Clock on the CLK OUT terminal on the digitizer. This value is not valid for the PXIe-5644/5645/5646 or PXIe-5820/5830/5831/5832/5840/5841/5842/5860.
    RefOut (RefOut)

    The signal is exported to the REF IN/OUT terminal on the PXIe-5652, the REF OUT terminals on the PXIe-5653, or the REF OUT terminal on the PXIe-5644/5645/5646, or PXIe-5820/5830/5831/5832/5840/5841/5842/5860.
    RefOut2 (RefOut2)

    The signal is exported to the REF OUT2 terminal on the LO. This connector exists only on some versions of the PXIe-5652.
    PFI0 (PFI0)

    The signal is exported to the PFI 0 connector on the PXIe-5142 and PXIe-5624.
    PFI1 (PFI1)

    The signal is exported to the PFI 1 connector on the PXIe-5142 and PXIe-5622.
    PXI_Trig0 (PXI_Trig0)

    The signal is exported to the PXI trigger line 0.
    PXI_Trig1 (PXI_Trig1)

    The signal is exported to the PXI trigger line 1.
    PXI_Trig2 (PXI_Trig2)

    The signal is exported to the PXI trigger line 2.
    PXI_Trig3 (PXI_Trig3)

    The signal is exported to the PXI trigger line 3.
    PXI_Trig4 (PXI_Trig4)

    The signal is exported to the PXI trigger line 4.
    PXI_Trig5 (PXI_Trig5)

    The signal is exported to the PXI trigger line 5.
    PXI_Trig6 (PXI_Trig6)

    The signal is exported to the PXI trigger line 6.
    PXIe_DStarC (PXIe_DStarC)

    The signal is exported to the PXI DStar C trigger line. This value is valid only on PXIe-5820/5830/5831/5832/5840/5841/5842/5860.
  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference of the instrument session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.