Specifies whether the RFmx driver validates the self-calibration data.

You can specify the time interval required to perform the check using the Self Cal Validity Check Time Interval property.

NI recommends to perform self-calibration using the RFmxInstr Self Calibrate VI when RFmx reports an invalid self-calibration data warning.

Note The RFmx driver does not consider self-calibration range data during self calibration validity check.

The default value is Off.

Supported devices: PXIe-5663/5663E/5665/5668, PXIe-5644/5645/5646, PXIe-5820/5830/5831/5832/5833/5840/5841/5842/5860

Remarks

The following table lists the characteristics of this property.

Short Name Self Cal Validity Check
Data type ci32.png
Permissions Read/Write
High-level VIs N/A
Resettable Yes
Off 0

Indicates that RFmx does not check whether device self-calibration data is valid.

Enabled 1

Indicates that RFmx checks whether device self-calibration data is valid and reports a warning from the RFmx Commit and RFmx Initiate VIs when the data is invalid.