Specifies the power level of the signal at the LO OUT terminal when the LO Export Enabled property is set to TRUE. This value is expressed in dBm.

For PXIe-5830/5831/5832, if you want to configure or read on LO1 or LO2 channel, use "lo1" or "lo2" as part of the selector string. You do not need to use a selector string or use "lo1, lo2" as part of the selector string if you want to configure this property for both channels. You can also use RFmxInstr Build LO String utility function to create the LO String. For all other devices, lo channel string is not allowed.

Note This property is not supported on a MIMO session.

You do not need to use a selector string if you want to configure this property for all signal instances. Specify the signal name in the selector string if you want to configure or read on that signal instance. Refer to the Selector string topic for information about the string syntax.

The default value is 0.

Supported devices: PXIe-5830/5831/5832/5840/5841/5842

Remarks

The following table lists the characteristics of this property.

Short Name LO Out Power (dBm)
Data type cdbl.png
Permissions Read/Write
High-level VIs N/A
Resettable Yes