LO:LO Leakage Avoidance Enabled
- Updated2025-04-08
- 1 minute(s) read
Specifies whether to reduce the effects of the instrument leakage by placing the LO outside the band of acquisition.
- the bandwidth required by the measurement is more than the available instrument bandwidth after offsetting the LO.
- you set the Downconverter Center Frequency or Downconverter Frequency Offset properties.
You do not need to use a selector string if you want to configure this property for all signal instances. Specify the signal name in the selector string if you want to configure or read that signal instance. Refer to the Selector Strings topic for information about the string syntax.
The default value for PXIe-5830/5831/5832/5840/5841/5842 is True, else the default value is False.
Supported devices: PXIe-5644/5645/5646, PXIe-5830/5831/5832/5840/5841/5842
Remarks
The following table lists the characteristics of this property.
| Short Name | LO Leakage Avoidance Enabled |
| Data type |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |
| False | 0 | RFmx does not modify the Downconverter Frequency Offset property. |
| True | 1 | RFmx calculates the required LO offset based on the measurement configuration and appropriately sets the Downconverter Frequency Offset property. |