Enables all the measurements that you specify in the Measurements parameter and disables all other measurements.


icon

Inputs/Outputs

  • cstr.png Selector String —

    Selector String specifies a selector string comprising of the signal name. If you do not specify the signal name, the default signal instance is used. The default value is "" (empty string).

    Examples:

    ""

    "signal::sig1"

    You can use the RFmxEVDO Build Signal String VI to build the selector string.

  • cgenclassrntag.png Instrument Handle In —

    Instrument Handle In specifies the RFmx session refnum. Instrument Handle In is obtained from the RFmxInstr Initialize NIRFSA VI.

  • c1denum.png Measurements —

    Measurements specifies the measurements to perform.

    ModAcc (0) Enables the ModAcc measurement.
    ACP (1) Enables the ACP measurement.
    CHP (2) Enables the CHP measurement.
    OBW (3) Enables the OBW measurement.
    SEM (4) Enables the SEM measurement.
    CDA (5) Enables the CDA measurement.
    SlotPhase (6) Enables the SlotPhase measurement.
    SlotPower (7) Enables the SlotPower measurement.

    The default is an empty array.

  • cbool.png Enable All Traces —

    Enable All Traces specifies whether to enable all traces for the selected measurement. The default value is FALSE.

  • cerrcodeclst.png error in (no error) —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • igenclassrntag.png Instrument Handle Out —

    Instrument Handle Out passes a reference to your RFmx session to the next VI.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.