SetTriggerMinimumQuietTimeDuration(string, double)
- Updated2025-04-08
- 1 minute(s) read
Sets the time duration for which the signal must be quiet before the signal analyzer arms the I/Q power edge trigger. This value is expressed in seconds. If you set the SetIQPowerEdgeTriggerSlope(string, RFmxEvdoMXIQPowerEdgeTriggerSlope) method to Rising, the signal is quiet below the trigger level. If you set the IQ Power Edge Slope method to Falling, the signal is quiet above the trigger level.
Syntax
Namespace: NationalInstruments.RFmx.EvdoMX
public int SetTriggerMinimumQuietTimeDuration(string selectorString, double value)
Remarks
This method sets the value of TriggerMinimumQuietTimeDuration attribute.The default value is 0 seconds.
Parameters
| Name | Type | Description |
|---|---|---|
| selectorString | string | Pass an empty string. The signal name that is passed when creating the signal configuration is used. |
| value | double | Specifies the time duration for which the signal must be quiet before the signal analyzer arms the I/Q power edge trigger. This value is expressed in seconds. If you set the SetIQPowerEdgeTriggerSlope(string, RFmxEvdoMXIQPowerEdgeTriggerSlope) method to Rising, the signal is quiet below the trigger level. If you set the IQ Power Edge Slope method to Falling, the signal is quiet above the trigger level. |
Returns
Returns the status code of this method. The status code either indicates success or describes a warning condition.