PhaseNoise:Range Definition Property
- Updated2024-04-10
- 1 minute(s) read
PhaseNoise:Range Definition Property
Short Name: PhaseNoise Range Definition
Property of RFmxSpecAn
Specifies how the measurement computes offset subranges.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is Auto.
| Manual (0) |
Specify the offset sub-ranges used for the measurement. Use the PhaseNoise Range Start Freq property and the PhaseNoise Range Stop Freq property to configure single or multiple range start and range stop frequencies. |
| Auto (1) |
Measurement computes offset sub-ranges by dividing the user configured offset range into multiple decade sub-ranges. The range is specified by the PhaseNoise Start Freq and the PhaseNoise Stop Freq properties. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | RFmxSpecAn PhaseNoise Configure Range Definition, RFmxSpecAn PhaseNoise Configure Range Definition |
| Resettable | Yes |