RFmxNRMXTriggerType Enumeration
- Updated2024-07-17
- 1 minute(s) read
RFmxNRMXTriggerType Enumeration
Specifies the type of trigger to be used for signal acquisition.
Namespace: NationalInstruments.RFmx.NRMX
Assembly: NationalInstruments.RFmx.NRMX.Fx40 (in NationalInstruments.RFmx.NRMX.Fx40.dll) Version: 24.5.0.49283 (24.5.0.49283)
Syntax
public enum RFmxNRMXTriggerType
Public Enumeration RFmxNRMXTriggerType
Members
| Member name | Value | Description | |
|---|---|---|---|
| None | 0 | No Reference Trigger is configured. | |
| DigitalEdge | 1 | The Reference Trigger is not asserted until a digital edge is detected. The source of the digital edge is specified using the SetDigitalEdgeTriggerSource(String, String) method. | |
| IQPowerEdge | 2 | The Reference Trigger is asserted when the signal changes past the level specified by the slope (rising or falling), which is configured using the SetIQPowerEdgeTriggerSlope(String, RFmxNRMXIQPowerEdgeTriggerSlope) method. | |
| Software | 3 | The Reference Trigger is not asserted until a software trigger occurs. |