Array VIs
- Updated2024-04-10
- 2 minute(s) read
Array VIs
Owning Palette: SEMUse the array VIs on this palette to configure the SEM measurements. You can also use the RFmxLTE Property Node to configure additional properties.
| Palette Object | Description |
|---|---|
| RFmxLTE SEM Configure Component Carrier Maximum Output Power (Array) |
Configures the array of maximum output power of the component carrier. Use "subblock<n>" as the selector string to configure this VI. |
| RFmxLTE SEM Configure Offset Frequency (Array) |
Configures the arrays of the start and stop frequencies and the sideband of an offset segment. Use "subblock<n>" as the selector string to configure this VI. |
| RFmxLTE SEM Configure Offset Bandwidth Integral (Array) |
Configures the array of the bandwidth integral of the offset segments. Use "subblock<n>" as the selector string to configure this VI. |
| RFmxLTE SEM Configure Offset RBW Filter (Array) |
Configures the offset RBW and the offset RBW filter type arrays. Use "subblock<n>" as the selector string to configure from this VI. |
| RFmxLTE SEM Configure Offset Limit Fail Mask (Array) |
Configures the array of limit fail mask of the offset segments that specifies the criteria to determine the measurement fail status. Use "subblock<n>" as the selector string to read results from this VI. |
| RFmxLTE SEM Configure Offset Absolute Limit (Array) |
Configures the array of the start limit and the stop limit of the offset segments. Use "subblock<n>" as the selector string to configure this VI. |
| RFmxLTE SEM Configure Offset Relative Limit (Array) |
Configures the array of start and stop relative limits of the offset segments. Use "subblock<n>" as the selector string to read results from this VI. |