ACP:Burst Synchronization Type Property
- Updated2024-04-10
- 1 minute(s) read
ACP:Burst Synchronization Type Property
Short Name: ACP Burst Sync Type
Property of RFmxBT
Specifies the type of synchronization used for detecting the start of the EDR packet in the adjacent channel power (ACP) measurement.
You do not need to use a selector string to configure or read this property for the default signal instance. Refer to the Selector Strings topic for information about the string syntax for named signals.
The default value is Preamble.
| None (0) |
Specifies that the measurement does not perform synchronization to detect the start of the packet. |
| Preamble (1) |
Specifies that the measurement uses the preamble field bits to detect the start of the packet. |
| Sync Word (2) |
Specifies that the measurement uses sync word for the BR/EDR packets and access address for the LE/LE-CS packets to detect the start of the packet. For BR /EDR packets, the sync word is derived from the BD Address LAP property. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | N/A |
| Resettable | Yes |