RFmxCDMA2k_SEMFetchLowerOffsetPowerArray
- Updated2024-10-14
- 2 minute(s) read
RFmxCDMA2k_SEMFetchLowerOffsetPowerArray
int32 __stdcall RFmxCDMA2k_SEMFetchLowerOffsetPowerArray (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, float64 absoluteIntegratedPower[], float64 relativeIntegratedPower[], float64 absolutePeakPower[], float64 peakFrequency[], float64 relativePeakPower[], int32 arraySize, int32* actualArraySize);
Purpose
Returns the arrays of lower offset segment power measurements.
Parameters
| Input | ||
| Name | Type | Description |
| instrumentHandle | niRFmxInstrHandle | Specifies the instrument session. The RFmx driver obtains this parameter from the RFmxCDMA2k_Initialize function. |
| selectorString | char[] | Specifies a selector string comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. Examples: "" "signal::sig1" "result::r1" "signal::sig1/result::r1" You can use the RFmxCDMA2k_BuildSignalString function to build the selector string. |
| timeout | float64 | Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete. |
| arraySize | int32 | Specifies the size of the array. Set the arraySize parameter to 0 to get the size of all the arrays in the actualArraySize parameter. |
| Output | ||
| Name | Type | Description |
| absoluteIntegratedPower | float64[] | Returns the array of lower (negative) offset segment powers measured. |
| relativeIntegratedPower | float64[] | Returns the array of powers in each lower (negative) offset segment relative to the carrier absolute integrated power. |
| absolutePeakPower | float64[] | Returns the array of peak powers measured in each lower (negative) offset segment. The power is measured in dBm. |
| peakFrequency | float64[] | Returns the array of frequencies at which the peak power occurred in each offset segment. This value is expressed in Hz. |
| relativePeakPower | float64[] | Returns the array of peak powers in the lower (negative) offset segment relative to the carrier absolute integrated power. |
| actualArraySize | int32* | Returns the actual size of the array, if you pass NULL to all output array parameters, and set the arraySize parameter to 0. |
Return Value
| Name | Type | Description | ||||||||
| status | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the RFmxCDMA2k_GetError function. The general meaning of the status code is as follows:
|
||||||||