RFmxCDMA2k_SEMFetchLowerOffsetMarginArray
- Updated2024-10-14
- 2 minute(s) read
RFmxCDMA2k_SEMFetchLowerOffsetMarginArray
int32 __stdcall RFmxCDMA2k_SEMFetchLowerOffsetMarginArray (niRFmxInstrHandle instrumentHandle, char selectorString[], float64 timeout, int32 measurementStatus[], float64 margin[], float64 marginFrequency[], float64 marginAbsolutePower[], float64 marginRelativePower[], int32 arraySize, int32* actualArraySize);
Purpose
Returns the array of measurement status and margins from the limit line measured in the lower offset segments.
Parameters
| Input | ||||||
| Name | Type | Description | ||||
| instrumentHandle | niRFmxInstrHandle | Specifies the instrument session. The RFmx driver obtains this parameter from the RFmxCDMA2k_Initialize function. | ||||
| selectorString | char[] | Specifies a selector string comprising of the signal name and result name. If you do not specify the signal name, the default signal instance is used. If you do not specify the result name, the default result instance is used. Examples: "" "signal::sig1" "result::r1" "signal::sig1/result::r1" You can use the RFmxCDMA2k_BuildSignalString function to build the selector string. |
||||
| timeout | float64 | Specifies the timeout, in seconds, for fetching the specified measurement. Set this value to an appropriate time, longer than expected for fetching the measurement. A value of -1 specifies that the function waits until the measurement is complete. | ||||
| arraySize | int32 | Specifies the size of the array. Set the arraySize parameter to 0 to get the size of all the arrays in the actualArraySize parameter. | ||||
| Output | ||||||
| Name | Type | Description | ||||
| measurementStatus | int32[] | Returns the array of lower offset measurement status based on measurement limits and the failure criteria specified by the standard.
|
||||
| margin | float64[] | Returns the array of margins from the limit mask value specified by the standard. This value is expressed in dB. Margin is defined as the maximum difference between the spectrum and the limit mask. |
||||
| marginFrequency | float64[] | Returns the array of frequencies at which the margin occurred in each lower (negative) offset segment. This value is expressed in Hz. |
||||
| marginAbsolutePower | float64[] | Returns the array of powers at which the margin occurred in the lower (negative) offset segment. This value is expressed in dBm. |
||||
| marginRelativePower | float64[] | Returns the array of powers at which the margin occurred in each lower (negative) offset segment relative to the carrier absolute integrated power. This value is expressed in dB. |
||||
| actualArraySize | int32* | Returns the actual size of the array, if you pass NULL to all output array parameters, and set the arraySize parameter to 0. | ||||
Return Value
| Name | Type | Description | ||||||||
| status | int32 | Returns the status code of this operation. The status code either indicates success or describes an error or warning condition. Examine the status code from each call to an RFmx function to determine if an error has occurred. To obtain a text description of the status code and additional information about the error condition, call the RFmxCDMA2k_GetError function. The general meaning of the status code is as follows:
|
||||||||