Installing Bus Connectors

Complete the following steps to install bus connectors on the DIN rail. Install the bus connectors for the REM-11180 and all appropriate I/O module before mounting the modules.


1378

  1. Insert the bus connector for the REM-11180 into the DIN rail.
  2. Insert the bus connector for an I/O module into the DIN rail.
    Caution Verify that you are using the correct bus connector for the module width.
  3. Slide the I/O module bus connector along the DIN rail until it connects to the preceding bus connector.
    Note A bus connector will not attach to a preceding bus connector with a mounted module. Remove the module before installing additional bus connectors.
  4. Repeat Steps 2 and 3 for all necessary bus connectors.