Moving the PXIe-8267 to a Different System

Complete the following steps to move your PXIe-8267 to a different system or chassis with a different controller.

Note The following steps apply only if the PXIe-8267 you are moving to a different system is in software RAID mode.
Note To avoid data loss, do not move, swap, or replace the drives.
  1. When the system boots, go into Disk Management. You will see four dynamic disks with yellow caution icons. Right-click any disk with a caution icon and select Import Foreign Disks.
    1378
  2. Be sure the Foreign disk group (4 of 4 disks) checkbox is enabled and click OK.
    1378
  3. You may see the following dialog box if a RAID volume was present on the PXIe-8267 before you moved it to the new system. Click OK to allow the new system to import the RAID volume. The initial data is preserved and will be readable in the new system.
    1378
  4. Your RAID drive is now ready for use in the new system.