Uninstalling the Adapter Module

Caution If the module has been in use, it may exceed safe handling temperatures and cause burns. Allow the module to cool before removing it from the chassis.

To properly remove an adapter module from the FlexRIO FPGA module, you must disable the adapter module within the LabVIEW FPGA user interface. To disable the adapter module within LabVIEW, complete the following steps.

  1. In your LabVIEW Project Explorer window, right-click the IO Module item under the FPGA Target and select Properties to display the IO Module Properties dialog box.
  2. Click the Status category to view the adapter module Status dialog.
  3. Deselect the checkbox for Enable IO Module Power. When this option is deselected, firmware tristates the FlexRIO I/O and disables all adapter module power rails.
  4. Click OK.
  5. Disconnect any cables from the module front panel connectors.
    Caution Disconnect any external clock or digital connections to the device front panel. Applying external signals while the device is powered off may cause damage.
  6. Power off the chassis.
  7. Ground yourself with a grounding strap or touch a grounded metal surface.
  8. Unscrew the adapter module.
  9. Remove the adapter module.
Store the module in the original antistatic packaging when not in use to avoid damage.