NI 5696 Amplitude Extender Module

Note Before you begin, install and configure your chassis and controller.

This document explains how to install, configure, and test the NI PXIe-5696 ( NI 5696 ) as a 20 GHz amplitude extender (AE) module to the NI PXIe-5654 ( NI 5654 ) RF signal generator. The NI 5696 ships with the NI-RFSG instrument driver, which you use to program the device.

Note The NI 5696 AE module is supported for use with only the NI 5654 RF signal generator.

To access NI 5696 documentation, navigate to Start » All Programs » National Instruments » NI-RFSG » Documentation.

The specifications document for your device is installed with the driver software. Refer to ni.com/manuals for the most recent specifications for your device.

Caution The protection provided by this product may be impaired if it is used in a manner not described in this document.
Hot Surface If the NI 5696 has been in use, it may exceed safe handling temperatures and cause burns. Allow the NI 5696 to cool before removing it from the chassis.