Installing the PXIe-416x Noise Filter Accessory
- Updated2025-10-24
- 1 minute(s) read
Installing the PXIe-416x Noise Filter Accessory
Complete the following steps to install the PXIe-416x Noise Filter Accessory with the PXIe-4163.
-
Connect the PXIe-416x Noise Filter Accessory to the PXIe-4163.
- Align the male D-SUB connector on the PXIe-416x Noise Filter Accessory and the female D-SUB connector on the front of the PXIe-4163 and attach.
- Tighten the screws on the front of the accessory until it is secured to the PXIe-4163. Tighten to a maximum torque of 3.6 lb · in. (0.407 N · m).
Figure 10. Noise Filter Accessory Connected to a SMU 
- Connect a compatible cable or connectivity accessory to the PXIe-416x Noise Filter Accessory.
-
Power on the chassis.
Note Low energy transients can appear at the output terminals of your PXIe-4163 during certain situations, such as power-up, power-down, device driver loading, and self-calibration.Note Refer to the PXIe-416x Noise Filter Accessory User Guide for more information.