You can configure fan behavior using software settings in MAX.

The PXIe-1095 supports both Auto and High fan modes for both the 38 W and 58 W cooling profiles. Refer to the Fan Mode section for more information about these modes.

You may also select a Manual fan mode. In this mode, you may manually set the fan speeds to achieve the desired performance.

Note You may not set the fan speeds or power settings lower than the minimum level required to maintain required cooling levels.

Complete the following steps to change the fan settings in MAX .

  1. In the Configuration tree, click on the PXI chassis you want to configure.
  2. In the right-hand pane, click on the Settings tab.
  3. In the Fans group, select the desired Mode and Cooling Profile using the drop-down menus.
  4. Click the Save button. Shortly after clicking the Save button, you should see the fan speeds change.