PCI Modules

You must configure the RTSI cable by completing the following steps:
  1. Connect an RTSI cable between the PCI devices to physically share triggers and/or clocks.
  2. Launch MAX.
  3. In the MAX configuration pane, right-click Devices and Interfaces, and select Create New.
  4. In the dialog box that opens, select NI-RTSI Cable.
  5. Click Finish.
  6. In the MAX configuration pane, right-click the NI-RTSI cable, select Add Device to NI-RTSI Cable, and select the device you want to add.

For more information about connecting PCI devices, refer to NI High-Speed Digitizers Help » Programming » Reference » NI-TClk Synchronization Help.