NI PXI-5671 NI RF vector signal generator

Note Before you begin, install and configure your chassis and controller.

This document explains how to install, configure, and test the NI 5671. The NI 5671 is a 2.7 GHz RF vector signal generator (VSG) with digital upconversion. The NI 5671 ships with the NI-RFSG instrument driver, which you use to program the device.

The NI 5671 comprises the following devices:

  • NI PXI-5610 (NI 5610) RF upconverter module
  • NI PXI-5441 (NI 5441) arbitrary waveform generator (AWG) module

To access NI 5671 documentation, navigate to Start » All Programs » National Instruments » NI-RFSG » Documentation.

The specifications document for your device is installed with the driver software. Refer to ni.com/manuals for the most recent specifications for your device.

Caution The protection provided by this product may be impaired if it is used in a manner not described in this document.
Hot Surface If the NI 5671 has been in use, it may exceed safe handling temperatures and cause burns. Allow the NI 5671 to cool before removing it from the chassis.