Represents all the fundamental properties for the RF local oscillator.

Derives from

Syntax

Namespace: NationalInstruments.ModularInstruments.NIRfsg

public class RfsgRFLocalOscillator : RfsgSubObject

Remarks

For more information, refer to the NI-RFSG Instrument Driver Programming Flow topic in the NI RF Signal Generators Help.

Properties

NameDescription
FrequencyStepSize

Gets or sets the step size for tuning the local oscillator (LO) phase-locked loop (PLL).

LOFrequency

Gets or sets the frequency of the LO source.

LOInPower

Gets or sets the power level of the signal at the front panel LO In connector in dBm.

LoopBandwidth

Gets or sets the loop bandwidth of the tuning phase-locked loops (PLL).

LOOutEnabled

Gets or sets whether the local oscillator signal is present at the front panel LO Out connector.

LOOutPower

Gets or sets the power level of the signal at the LO OUT front panel connector.

LOVcoFrequencyStepSize

Gets or sets the step size for tuning the internal voltage-controlled oscillator (VCO) used to generate the LO signal.

PllFractionalModeEnabled

Gets or sets whether to use fractional mode for the local oscillator (LO) phase-locked loop (PLL). This property enables or disables fractional frequency tuning in the LO.

Source

Gets or sets whether to use internal or external local oscillator (LO) source.

this[string channelName]

Gets the RfsgChannelBasedLO sub-object to configure channel based LO properties.