Enables the detection of burst start and burst stop locations in the waveform. Set this method to Enabled before writing a waveform to RFSG memory for detecting bursts. You can read the detected burst start and burst stop locations using GetWaveformBurstStartLocations and GetWaveformBurstStopLocations methods respectively. blockquote>When you download a waveform using ReadandDownloadWaveformFromfileTDMS and if RFBlankingproperty is enabled, you must set the RfsgBurstDetectionEnabled property to Disable.

Note

For PXIe-5830/5831/5832, the RF Blanking reserves a PXI trigger line. If you are calling any ResetDevice or RfsaDriverUtility.ResetDevice on the same device, NI recommends calling it before committing blanking attributes. Alternatively, you can call ResetWithOptions or RfsaDriverUtility.ResetWithOptions. Select Routes in the stepsToOmit parameter.

/summary> value> Specifies the detection of burst start and burst stop locations in the waveform. /value>

Syntax

Namespace: NationalInstruments.ModularInstruments.NIRfsg

public RfsgBurstDetectionEnabled Enabled { get; set; }

Remarks

Supported Devices: PXIe-5820/5830/5831/5832/5840/5841