RfsaSignalPath Class
- Updated2025-10-14
- 2 minute(s) read
Represents the signal path properties.
Derives from
Syntax
Namespace: NationalInstruments.ModularInstruments.NIRfsa
public class RfsaSignalPath : RfsaSubObject
Remarks
For more information, refer to NI RF Vector Signal Analyzers Help.
Properties
| Name | Description |
|---|---|
| Advanced | Gets the Advanced sub-object providing access to advance features related to RfsaSignalPath. |
| AvailablePorts | Gets a comma-separated list of the ports available for use based on your instrument configuration. |
| DigitalIFEqualizationEnabled | Gets or sets whether to enable or disable digital equalization filter for the RF downconverter. |
| DigitizerDitherEnabled | Gets or sets whether dithering is enabled on the digitizer. |
| DigitizerVerticalRange | Gets or sets the vertical range of the digitizer. |
| EnableFractionalResampling | Gets or sets whether fractional resampling is enabled on the digitizer. |
| IFFilterBandwidth | Gets or sets the IF Filter Bandwidth of the device. |
| LO2ExportEnabled | Gets or sets whether to enable the LO2 OUT terminal on the installed devices. |
| LocalOscillator | Gets the LocalOscillator sub-object used to configure LO properties. An active channel can be passed using the indexer NationalInstruments.ModularInstruments.NIRfsa.RfsaLocalOscillator.this[string]. |
| LOExportEnabled | Gets or sets whether to enable the LO OUT terminals on the NI 5603 RF downconverter. |
| LOFrequency | Gets or sets the LO signal frequency for the configured center frequency. |
| LOOutExportConfigureFromRfsg | Gets or sets whether to allow NI-RFSG to control the NI-RFSA LO out export. |
| LOSource | Gets or sets the LO Source for the device. |
| NI5663 | Gets the signal path features related specifically to the NI 5663. |
| NI5665 | Gets the NI5665 sub-object containing signal path related features specific to NI5665. |
| NI5694 | Gets the NI5694 sub-object containing signal path related features specific to NI5694. |
| RFOutLOExportEnabled | Gets or sets whether to enable the RF OUT LO OUT terminal on the PXIe-5840. |
| SelectedPorts | Gets or sets which port to configure to acquire a signal. |