Construct ATR
- Updated2023-02-17
- 2 minute(s) read
Construct ATR
Constructs the value that the Write ATR Register node uses to write to an ATR register for advanced daughterboard configuration.
Inputs/Outputs
daughterboard
Daughterboard type to construct the register value for.
antenna configuration
The antenna state of the daughterboard.
lo lpf enable
LO LPF state of the daughterboard.
rx.configuration
The settings to use for the Rx side of the daughterboard, including power enable, mixer enable, and gain.
tx.configuration
The settings to use for the Tx side of the daughterboard, including power enable, mixer enable, and gain.
spi address
Specifies the destination for configuration packets sent to the daughterboard. Valid only for USRP-29x4 devices.
cpld enable
Specifies the CPLD power state on the daughterboard. Valid only for USRP-29x4 devices.
atr register value
32-bit value to program an ATR register with.