Scanning Configuration:Scan Advanced Polarity Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: Scan Advanced Polarity
Property of niSwitch
Specifies the driving level for the Scan Advanced Output signal sent from the switch module through either the external (PXI/PXIe) or front connector (SCXI) lines. When the Scan Advanced Output signal is sent to one of the PXI_Trig lines, the driven level is always low and this property is ignored. Between each Scan Advanced Output signal, the line is not driven and is in a high-impedance state.
Related topics
| RISING_EDGE (0) |
The trigger occurs on the rising edge of the signal. |
| FALLING_EDGE (1) |
The trigger occurs on the falling edge of the signal. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| Channel-based | No |
| Resettable | No |