Configures the trigger to start the S-parameter measurement. The measurement is complete when there is a rising edge on the assigned trigger. This configuration only supports the 2 couplers per port 1 VST with solid state switch setup. If the trigger is not configured or configured for an unsupported setup the measurement is performed immediately after initiated.


icon

Inputs/Outputs

  • cdatavalref.png S-Par Reference In —

    Specifies the session reference handle of the S-parameter measurement session.

  • cstr.png Start Trigger Input —

    Specifies the terminal on which the S-parameter session looks for a start trigger. The default value is None.

  • cerrcodeclst.png error in —

    Error conditions that occur before this node runs. This input provides standard error in functionality.

  • idatavalref.png S-Par Reference Out —

    Returns the session reference handle of the S-parameter measurement session.

  • ierrcodeclst.png error out —

    Error information. This output provides standard error out functionality.