Specifies a single value to compensate for the attenuation on the signal path from VST RF out to the ports connected to the DUT.


icon

Inputs/Outputs

  • cenum.png Path Selection —

    Specifies the path to apply the attenuation setting.

  • cdatavalref.png S-Par Reference In —

    Specifies the session reference handle of the S-parameter measurement session.

  • cdbl.png Tx Constant Attenuation (dB) —

    Specifies the constant attenuation value applied to the RFSG session. For example, if the attenuation is set to 1 dB and the Configure RFSG Power Level VI Power Level (dBm) input is set to 0 dBm, the actual power level at the VST RFout port is 1 dBm to compensate for the attenuation on the signal path.

  • cerrcodeclst.png error in —

    Error conditions that occur before this node runs. This input provides standard error in functionality.

  • idatavalref.png S-Par Reference Out —

    Returns the session reference handle of the S-parameter measurement session.

  • ierrcodeclst.png error out —

    Error information. This output provides standard error out functionality.