Triggering:Trigger Width:Width Condition Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: Width Condition
Property of niScope
Specifies whether the oscilloscope triggers on pulses within or outside the duration range bounded by the Width Low Threshold and Width High Threshold properties.
Default Value: Within
| Within (1) |
The oscilloscope triggers on pulses with a duration within the range bounded by Width Low Threshold and Width High Threshold. |
| Outside (2) |
The oscilloscope triggers on pulses with a duration not within the range bounded by Width Low Threshold and Width High Threshold. |
Remarks
The following table lists the characteristics of this property.
| Datatype |  |
| Permissions | Read/Write |
| High-level VIs | niScope Configure Trigger Width (Width Trigger) |
| Channel-based | No |
| Resettable | No |