Triggering:Trigger Holdoff Property

Short Name: Trigger Holdoff

Property of niScope

Specifies the length of time the digitizer waits after detecting a trigger before enabling the trigger subsystem to detect another trigger. The units are seconds.

This property affects instrument operation only when the digitizer requires multiple acquisitions to build a complete waveform. The digitizer requires multiple waveform acquisitions when it uses equivalent-time sampling or when the digitizer is configured for a multirecord acquisition through a call to niScope Configure Horizontal Timing.

Remarks

The following table lists the characteristics of this property.

Datatype
Permissions	Read/Write
High-level VIs	niScope Configure Trigger Digital (Digital Edge Ref Trigger), niScope Configure Trigger Edge (Analog Edge Ref Trigger), niScope Configure Trigger Glitch (Glitch Trigger), niScope Configure Trigger Hysteresis (Analog Hysteresis Ref Trigger), niScope Configure Trigger Runt (Runt Trigger), niScope Configure Trigger Software (Software Ref Trigger), niScope Configure Trigger Video (Video Ref Trigger), niScope Configure Trigger Width (Width Trigger), niScope Configure Trigger Window (Analog Window Ref Trigger)
Channel-based	No
Resettable	No