Peer-to-Peer:Manual:Notification:Push Message On Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: Push Message On
Property of niScope
Specifies the event to push the Message Push Value property to the Message Push Address property. Specifying Done will push the message when the acquisition has completed. This property is endpoint-based.
![]() |
Note This property can be used only with high-speed digitizers that support peer-to-peer streaming. |
Done (1) |
Notify when digitizer acquisition is done. |
Never (0) |
Never send notification. |
Remarks
The following table lists the characteristics of this property.
Datatype | ![]() |
Permissions | Read/Write |
High-level VIs | N/A |
Channel-based | No |
Resettable | No |