Waveform Measurement:Filter:Cutoff Frequency Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: Filter Cutoff Frequency
Property of niScope
Specifies the cutoff frequency in hertz for filters of type lowpass and highpass. The cutoff frequency definition varies depending on the filter. The default value is 1.0e6 Hz.
Remarks
The following table lists the characteristics of this property.
Datatype | ![]() |
Permissions | Read/Write |
High-level VIs | N/A |
Channel-based | Yes |
Resettable | No |