Vertical:Advanced:Digital Gain Property
- Updated2023-02-21
- 1 minute(s) read
Short Name: Digital Gain
Property of niScope
Applies gain to the specified channel in hardware before any onboard signal processing occurs. The default value is 1.
The output of the digital gain/offset block is as follows:
(ADC value × digital gain) + digital offset
Units: Unitless
Valid Values: -1.5 to 1.5
![]() |
Note This property can be used only with high-speed digitizers that support onboard signal processing (OSP). NI-SCOPE returns an error if you use this property with a device that does not support OSP. |
Related topics:
Remarks
The following table lists the characteristics of this property.
Datatype | ![]() |
Permissions | Read/Write |
High-level VIs | N/A |
Channel-based | Yes |
Resettable | No |