Onboard Signal Processing:DDC:Center Frequency Property

Short Name: Center Frequency

Property of niScope

The frequency at which the DDC block frequency translates the input data. The default value is 10 MHz.

Note  This property can be used only with high-speed digitizers that support onboard signal processing (OSP). NI-SCOPE returns an error if you use this property with a device that does not support OSP.

Valid Values

0 - (0.5 × Sample Clock Timebase Rate for digitizer)

Remarks

The following table lists the characteristics of this property.

Datatype
Permissions	Read/Write
High-level VIs	N/A
Channel-based	Yes
Resettable	No