Configures the digitizer to generate a signal pulse that other digitizers can detect when configured for digital triggering.

For NI-DAQmx devices, closing the session clears the routes. However, if you want to clear the routes before closing the session, call this VI again, routing the Stop Trigger to None.

This VI is obsolete. Consider using niScope Export Signal instead.


icon

Inputs/Outputs

  • cu16.png trigger event —

    trigger event specifies the condition in which this device will generate a digital pulse.

  • civrn.png instrument handle —

    instrument handle identifies a particular instrument session.

  • cu16.png trigger output source —

    trigger output source specifies the hardware signal line on which the digital pulse is generated.

    Default Value: No event (none)

    Defined Values

    None

    RTSI 0

    RTSI 1

    RTSI 2

    RTSI 3

    RTSI 4

    RTSI 5

    RTSI 6

    RTSI 7

    PFI 0

    PFI 1

    PFI 2

    PXI Star

  • cerrcodeclst.png error in —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • iivrn.png instrument handle out —

    instrument handle out has the same value as the instrument handle.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.