Configures the common properties of a digital trigger.

Note Digital triggering is not supported in RIS mode.


icon

Inputs/Outputs

  • ci32.png trigger slope —

    trigger slope specifies either a rising edge or a falling edge to trigger the digitizer.

    Refer to the Trigger Slope property for defined values.

  • civrn.png instrument handle —

    instrument handle identifies a particular instrument session.

  • cstr.png trigger source —

    trigger source passes the source you want the digitizer to monitor for a trigger.

    Default Value: Channel 0

    Refer to the Trigger Source property for defined values.

  • cerrcodeclst.png error in —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • cdbl.png trigger holdoff —

    trigger holdoff specifies the length of time the digitizer waits after detecting a trigger before enabling NI-SCOPE to detect another trigger.

    Default Value: 0.0 s

  • cdbl.png trigger delay —

    trigger delay specifies how long the digitizer waits after it receives the trigger to start acquiring data.

    Default Value: 0.0 s

  • iivrn.png instrument handle out —

    instrument handle out has the same value as the instrument handle.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.