Configures the properties that control the electrical characteristics of the channel. These properties are the input impedance and the bandwidth.

Related topics:


icon

Inputs/Outputs

  • civrn.png instrument handle —

    instrument handle identifies a particular instrument session.

  • cstr.png channels —

    channels specifies the channel(s) from which to acquire data. For more information, refer to Channel String Syntax.

  • cu32.png input impedance —

    input impedance is the input impedance for the channel.

    Default Value: 1 mega ohm

    Defined Values

    1 mega ohm

    50 ohms

  • cdbl.png max input frequency —

    maximum input frequency specifies the bandwidth of the channel at which the input circuitry attenuates the signal by 3 dB. Pass 0 for this value to use the hardware default bandwidth. Pass -1 for this value to achieve full bandwidth.

    Default Value: 0.00 Hz

  • cerrcodeclst.png error in —

    error in describes error conditions that occur before this node runs. This input provides standard error in functionality.

  • iivrn.png instrument handle out —

    instrument handle out has the same value as the instrument handle.

  • ierrcodeclst.png error out —

    error out contains error information. This output provides standard error out functionality.