Self Calibrate
- Updated2023-02-17
- 2 minute(s) read
Self Calibrate
Self-calibrates most NI digitizers, including all SMC-based devices.
Inputs/Outputs
session in
Handle that identifies the NI-SCOPE instrument session as previously allocated by Initialize With Options .
error in
Error conditions that occur before this node runs.
The node responds to this input according to standard error behavior.
Default value: No error
channels
The channel(s) to calibrate.
Channel String Syntax
This input parameter has the following syntax options:
- A single channel, such as 0
- A list of channels, such as 0,1 or 3,2,1,0
- A range of channels, such as 0-7 or 0:7
- All channels, which is designated by an empty string
- A combination of channels from multiple instruments, such as PXI1Slot3/0,PXI1Slot3/2-3,PXI1Slot4/2-3
option
Self-calibrates all channels or restores the external calibration.
| Self Calibrate All Channels | 0 | Performs a self-calibration on all available channels. |
| Restore External Calibration | 1 | Restores the external calibration. |
Default value: Self Calibrate All Channels
session out
Reference to the NI-SCOPE instrument session to pass to the next node in the program.
error out
Error information.
The node produces this output according to standard error behavior.