External Calibration
- Updated2023-02-17
- 2 minute(s) read
External Calibration
External calibration functions for NI-SCOPE.
Calibration functions for NI-SCOPE.
For the PXI-5900 PXI RF Amplifier, this node calibrates the gain and offset.
Externally calibrates the compensation attenuator.
For the PXIe/PXI/PCI-5105, this function calibrates the external clock digital clock managers (DCMs).
For the PXIe-5622, this node calibrates the frequency response of the device.
Externally calibrates the vertical offset.
Externally calibrates the vertical range for the specified channel and vertical range setting.
Calibrates the sample rate of SMC-based digitizers.
Changes the password used to begin an external calibration session.
Closes an external calibration session.
Returns the number of times the oscilloscope has been calibrated.
Returns the miscellaneous information you can store during an external calibration session using Set Calibration User-Defined Info.
Returns the date of the last self-calibration, external calibration, or manufacturer calibration.
Returns the onboard temperature, in degrees Celsius, of an SMC-based oscilloscope at the time of the last self-calibration or external calibration.
Opens an external calibration session and produces a calibration session handle that is required by the external calibration nodes.
Takes an acquisition from a specified channel and retrieves the initial X value, which includes the time-to-digital conversion.
For the PXI-5900 PXI RF Amplifier, this node connects the specified channel to the calibration source and sets the calibration source to ±10 V or to GND.
Allows you to store miscellaneous information in the EEPROM of a device.