To establish a dynamic route across segments, you must specify a fully qualified terminal name for the source and destination signal.
  1. Launch NI Measurement & Automation Explorer (MAX).
  2. Expand Devices and Interfaces, then expand the Chassis tree.
    Note If you are using a remote RT target, expand Remote Systems, find and expand your remote RT target, and then expand Devices and Interfaces.
  3. Select your chassis.
    The attributes of your chassis are displayed on the right of the MAX window.
  4. Click the Trigger tab below the attributes view.
    A table in the Triggers view shows the PXI trigger bus segments of your chassis.
  5. Configure the static route that you want to make and save the changes.
    Note You may not be able to establish a dynamic route across segments if your application already contains too many static routes between PXI trigger buses of your chassis or if your hardware route segmentation does not support dynamic signal routing. Refer to your chassis documentation to determine the number of allowed static routes between the PXI trigger buses of your chassis and whether your chassis supports dynamic signal routing.