Fetches the compression power at x dB (PxdB) in a tabulated format.


icon

Inputs/Outputs

  • cdatavalref.png PAE Reference In —

    Specifies the session reference handle of the PAE measurement session.

  • cerrcodeclst.png error in —

    Error conditions that occur before this node runs. This input provides standard error in functionality.

  • idatavalref.png PAE Reference Out —

    Returns the session reference handle of the PAE measurement session.

  • i1ddbl.png Output Power —

    Output Power Returns the RF power measured for the DUT on the last measured frequency.

  • i1ddbl.png Input Power —

    Input Power Returns the RF Input power applied at the DUT input port for the last measured frequency.

  • i1dcclst.png PxdB Results —

    PxdB Results Returns the measured PxdB results. This parameter returns a 1D array that contains Pin@PxdB, Pout@PxdB, PxdB Found, Gain (linear range), and Frequency level (Hz).

  • idbl.png Pin at PxdB (dBm) —

    The input power to the DUT at the PxdB compression point.

  • idbl.png Pout at PxdB (dBm) —

    The output power of the DUT at the PxdB compression point.

  • ibool.png PxdB Found —

    Returns true if the PxdB compression point was found for Frequency Level (Hz) and false if the PxdB compression point could not be determined.

  • idbl.png Gain (Linear Range) (dB) —

    The gain of the DUT. The gain is calculated using measurements where the RF power at the DUT input port is less than Maximum Linear Range (dBm).

  • idbl.png Frequency Level (Hz) —

    The frequency the measurement was performed at.

  • ierrcodeclst.png error out —

    Error information. This output provides standard error out functionality.